What Does a Radon Mitigation Warranty Typically Cover?

Last Updated: October 2026 8 min read

A radon mitigation warranty usually has up to three parts: a manufacturer’s warranty on the fan, the installer’s warranty on their workmanship and, from some contractors, a performance guarantee that radon will stay below a stated level. There’s no industry-standard warranty, so the length, conditions and exclusions vary from one contractor to the next. The details that matter most are what’s covered, for how long, who pays for labor and whether the warranty transfers if you sell. This article explains each part, what’s commonly left out and what to ask before you sign.

The three parts of a typical mitigation warranty

Most homes with elevated radon are fixed with active soil depressurization. A sealed PVC pipe and an inline fan draw radon from beneath the foundation and release it above the roofline. A warranty can cover the equipment, the installation or the result, and those are often separate promises.

The fan manufacturer’s warranty

The fan is the only moving part in most systems, and it runs around the clock, so it’s the component most likely to need replacing. Fan warranties come from the manufacturer and cover defects in materials or workmanship. They typically don’t cover damage from improper installation, wiring errors or misuse.

Terms vary by brand and sometimes by who installs the fan. A major retailer’s listing for RadonAway’s RP145c fan describes a one-year limited warranty that extends to five years when a radon professional installs it. Fantech’s installation manual for one of its radon fans provides a five-year warranty on parts with factory defects, says incorrect installation voids the warranty and excludes the costs of removing and reinstalling the fan.

That last point catches some homeowners by surprise. A manufacturer may replace a defective fan for free while you still pay someone to take the old one down and install the new one. Some contractors cover that labor during their own warranty period, and some don’t.

The installer’s workmanship warranty

A workmanship warranty covers problems caused by how the system was installed. That can include pipe joints that separate or leak, failed seals around the suction point, loose mounting, improper wiring or a roof penetration that leaks. The length is set by the contractor and isn’t standardized, so get it in writing.

The performance guarantee

Some contractors guarantee that the system will reduce radon to a stated level, most often below the EPA action level of 4 pCi/L (picocuries per liter, the U.S. unit for radon), for a set period. The Missouri Department of Health and Senior Services notes that some contractors offer a guarantee that they’ll adjust or modify the system to reach the promised level, and that this kind of option may add to the cost but can be worth it.

A performance guarantee usually means the contractor will come back and modify the system, such as adding a suction point, upgrading the fan or sealing more openings, if a qualifying test shows radon above the stated level. Read the conditions carefully. Contracts may specify how and when the test must be done, who must perform it and what happens if the contractor can’t reach the target.

No contractor can promise zero radon. The EPA considers no level completely safe, and radon varies with the seasons. A guarantee tied to 4 pCi/L means the contractor commits to that number, not that every reading will be very low.

What’s commonly excluded

Exclusions differ by contract, but these situations are frequently limited or excluded, so look for them in yours:

  • Changes to the home. Finishing a basement, adding a room, cutting new floor openings, or replacing heating and exhaust equipment can change how soil gas enters and how the system performs. Some contracts exclude results after major changes or require them to be reported.
  • Turning off or altering the system. Unplugging the fan, removing pipe, or having someone else modify the system may void coverage.
  • Improper installation or wiring by others. Manufacturer warranties commonly exclude this, which is one reason a professional installation matters.
  • Labor and removal costs for a fan swap. As noted above, these may fall outside the manufacturer’s coverage.
  • Accidental damage. Damage from storms, falling ice, pests, misuse or electrical problems may be excluded, depending on the warranty.

If an exclusion isn’t clear, ask the contractor to explain it in writing before work starts.

Is the warranty transferable if you sell?

Not always. Both the National Radon Safety Board (NRSB) and the Missouri health department recommend that the contract state whether warranties or guarantees transfer to a new owner. A transferable warranty can be a selling point, since buyers often ask about radon systems during inspections. Keep the contract, warranty documents, fan model information and post-mitigation test results together so you can share them. Our guide for real estate agents on radon explains how systems usually come up in a sale.

What you’re expected to do as the owner

Many warranties assume the system is left running and checked. National ANSI/AARST mitigation standards require a system label that includes maintenance and monitoring instructions, the installer’s name and certification number, and a recommendation to retest for radon at least every two years.

Most systems include a warning device, often a U-tube manometer on the pipe that shows the fan is pulling suction. Check it periodically. If the liquid levels are even or the fan has gone silent, contact the installer. A change in fan noise can also be an early sign of wear, which our article on how noisy a radon fan is covers. Retesting matters too. A system can still be running while radon creeps up because of a change in the house or the soil, and a test is the only way to know.

Questions to ask before you sign

The NRSB and state radon programs suggest getting estimates from at least two certified contractors and comparing warranties along with price. These questions help:

  • Is the fan covered by the manufacturer, and for how long?
  • Do you cover the labor to replace a failed fan, and for how long?
  • What does your workmanship warranty cover, and how long does it last?
  • Do you guarantee a specific radon level? Which level, for how long and under what testing conditions?
  • If a follow-up test is high, what will you do, and at what cost?
  • Does post-mitigation testing come with the job? When, how many tests and who performs them?
  • Is the warranty transferable to a buyer?
  • What would void the warranty?

Our guide to hiring a certified radon mitigator and our radon contractor checklist include these and other questions about credentials, permits and insurance.

Frequently asked questions

Does a mitigation warranty cover a failed post-mitigation test?

Only if the contract includes a performance guarantee. With one, the contractor typically agrees to modify the system until a qualifying test meets the stated level. Without one, additional work may be billed separately. Our article on what to do when a post-mitigation test fails walks through the usual next steps.

Does a “lifetime warranty” mean the fan will be replaced for free forever?

Not necessarily. “Lifetime” can refer to the workmanship, the pipe, the owner’s lifetime or the time you own the house, and it may not include the fan or labor. Ask what the word covers and get the terms in writing. A clearly defined shorter warranty can be more useful than a vague longer one.

Will installing a system myself void the fan warranty?

It can. Some manufacturers offer a shorter warranty for non-professional installation or exclude damage from improper installation. Installing a system yourself also means you won’t have a contractor’s workmanship or performance warranty, and some states require licensed or certified mitigators.

Is an extended warranty or service plan worth it?

It depends on what it adds. A plan that covers fan replacement labor, periodic system checks or retesting can be useful, since fans eventually wear out. Compare its price with what those services would cost on their own, and check whether it transfers if you sell.

Read the warranty before you need it

A good mitigation warranty spells out what’s covered, for how long, who pays for labor, what voids it and whether it transfers. Since the fan is the part most likely to fail and radon can change over time, look closely at fan coverage and any performance guarantee, and keep retesting after the system is installed. If you’re comparing contractors, you can connect with certified radon mitigation professionals in your area and ask each to put their warranty terms in writing.

Sources and further reading

This article is for general educational purposes and is not legal advice. Warranty terms vary by contractor and manufacturer and can change. Read your contract carefully and ask the contractor to clarify any terms in writing. Long-term radon exposure causes lung cancer; reducing elevated radon lowers future exposure but doesn’t reverse exposure already received.

RR lead magnet

Check Radon Levels Near You

Radon levels vary dramatically from one ZIP code to the next. Look up your address to see EPA zone, average measured levels from nearby homes, and certified contractors in your area.