Call For A Free Quote: 1-800-299-3578 (toll free) | 507-369-2661 (local)

Milroy, MN Radon Levels

Check local Milroy radon levels and find certified testing and mitigation professionals to keep your home safe


Milroy, MN Radon Facts

EPA Radon Zone Zone 1 — High Risk > 4.0 pCi/L (Zone 1)
County Redwood County, MN
Zip Code 56263

Located in Redwood County on the Minnesota prairie, Milroy sits over glacial deposits and sedimentary bedrock that can produce moderate to elevated radon levels. While specific testing data for zip code 56263 is unavailable, the geological conditions throughout southwestern Minnesota warrant attention to radon testing. Homeowners should test their properties, especially those with basements where radon accumulation is most likely.

12.00
pCi/L area average
Above EPA Action Level

Nearby homeowner readings average 12.00 pCi/L, based on 1 test from 1 nearby city. No readings have been submitted for Milroy yet, so the closest recorded data is shown as a benchmark. The EPA recommends taking action at or above 4.0 pCi/L.

0
4.0 EPA
10+

Milroy, MN Radon Mitigation

Professional radon mitigation is the most effective way to permanently lower radon levels and protect your household.

Need Radon Mitigation or Testing in Milroy?

  • 100% Free, No-Obligation Quotes
  • Matches You with State-Licensed Redwood County Pros
1-800-299-3578 507-369-2661 (local) Toll-free · Mon–Fri 8am–6pm ET

Radon Readings Near Milroy, MN

No homeowner tests have been submitted for Milroy yet. The closest cities with user-submitted radon data are shown below — explore them to gauge local conditions. Radon varies by home, so testing is the only way to know your level.

CityDistanceAvg User LevelReadings
Sleepy Eye 42.2 mi 12.00 pCi/L 1

Redwood County Radon Profile

Because of its underlying geology, Redwood County is mapped as EPA Radon Zone 1 — the most elevated classification — where predicted indoor screening averages exceed 4 pCi/L. Direct test data for Redwood County remains limited, so the closest neighboring readings are used here to represent the radon conditions homeowners are likely to encounter. As the second leading cause of lung cancer in the U.S., radon warrants testing in every Redwood County home regardless of zone or a neighbor's results.

Radon FAQ for Milroy, MN

What EPA Radon Zone is Milroy in?
Milroy and the 56263 zip code are in Redwood County, which has an EPA assigned Radon Zone of 1. A zone of 1 predicts an average indoor radon screening level greater than 4 pCi/L.
Why are radon readings shown from areas near Milroy?
No homeowner radon tests have been submitted for Milroy yet. Because radon is driven by regional soil and bedrock geology, readings from the closest cities—and the Redwood County average—are the best available indicator of local conditions until Milroy homeowners submit their own results. The EPA still recommends testing every individual home, since levels can vary significantly from house to house.
How much does radon mitigation cost in Milroy?
Radon mitigation in Milroy typically costs between $800 and $2,000. Most homes with standard basements can be mitigated with a sub-slab depressurization system in the $1,000–$1,500 range. Factors that can increase cost include complex foundations, crawl spaces, or very high radon levels.
Should I test for radon if I'm buying a home in Milroy?
Yes. Radon testing should be part of every home purchase. A short-term radon test is typically included as part of the home inspection process and costs $150–$250. If elevated levels are found, you can negotiate mitigation as part of the sale.