Call For A Free Quote: 1-800-299-3578 (toll free) | 952-222-3870 (local)

Howard Lake, MN Radon Levels

Check local Howard Lake radon levels and find certified testing and mitigation professionals to keep your home safe


Howard Lake, MN Radon Facts

EPA Radon Zone Zone 1 — High Risk > 4.0 pCi/L (Zone 1)
County Wright County, MN
Zip Code 55349

Located in Wright County within the Minneapolis-St. Paul metro area, Howard Lake sits in EPA Zone 1 where radon testing data remains limited. The community's mix of older farmsteads and newer residential developments, many with full basements typical of Minnesota construction, creates varying radon risk profiles. Given the glacial till soils common throughout this region, homeowners should conduct baseline radon testing to establish safety levels.

8.67
pCi/L area average
Above EPA Action Level

Wright County average: 8.67 pCi/L, based on 3 user-submitted tests across 3 cities in the county. No homeowner readings have been submitted for Howard Lake itself yet, so this county figure is the closest available benchmark. The EPA recommends taking action at or above 4.0 pCi/L.

0
4.0 EPA
10+

Howard Lake, MN Radon Mitigation

Professional radon mitigation is the most effective way to permanently lower radon levels and protect your household.

Need Radon Mitigation or Testing in Howard Lake?

  • 100% Free, No-Obligation Quotes
  • Matches You with State-Licensed Wright County Pros
1-800-299-3578 952-222-3870 (local) Toll-free · Mon–Fri 8am–6pm ET

Radon Readings Near Howard Lake, MN

No homeowner tests have been submitted for Howard Lake yet. The closest cities with user-submitted radon data are shown below — explore them to gauge local conditions. Radon varies by home, so testing is the only way to know your level.

CityDistanceAvg User LevelReadings
Buffalo 13.0 mi 11.00 pCi/L 1
Delano 13.2 mi 5.00 pCi/L 1
Hutchinson 19.2 mi 7.50 pCi/L 2
Loretto 19.8 mi 6.00 pCi/L 1
Monticello 20.8 mi 10.00 pCi/L 1
Mound 21.9 mi 6.00 pCi/L 1
Watkins 24.5 mi 5.00 pCi/L 1
Victoria 24.6 mi 4.00 pCi/L 1

Wright County Radon Profile

The bedrock and soils beneath Wright County are classified by the EPA as Radon Zone 1, the highest-risk tier, with predicted average indoor screening levels above 4 pCi/L. Homeowner-submitted tests from 3 cities in Wright County average 8.67 pCi/L across 3 tests — above the EPA's 4 pCi/L action level, reinforcing the need for testing across the county. Radon is the second leading cause of lung cancer in the United States, and a short-term test is the only way to confirm a specific home's level in Wright County.

Radon FAQ for Howard Lake, MN

What EPA Radon Zone is Howard Lake in?
Howard Lake and the 55349 zip code are in Wright County, which has an EPA assigned Radon Zone of 1. A zone of 1 predicts an average indoor radon screening level greater than 4 pCi/L.
Why are radon readings shown from areas near Howard Lake?
No homeowner radon tests have been submitted for Howard Lake yet. Because radon is driven by regional soil and bedrock geology, readings from the closest cities—and the Wright County average—are the best available indicator of local conditions until Howard Lake homeowners submit their own results. The EPA still recommends testing every individual home, since levels can vary significantly from house to house.
How much does radon mitigation cost in Howard Lake?
Radon mitigation in Howard Lake typically costs between $800 and $2,000. Most homes with standard basements can be mitigated with a sub-slab depressurization system in the $1,000–$1,500 range. Factors that can increase cost include complex foundations, crawl spaces, or very high radon levels.
Should I test for radon if I'm buying a home in Howard Lake?
Yes. Radon testing should be part of every home purchase. A short-term radon test is typically included as part of the home inspection process and costs $150–$250. If elevated levels are found, you can negotiate mitigation as part of the sale.