Hillman, MN Radon Levels

Q: What EPA Radon Zone is Hillman in?

Hillman is in Morrison County, EPA Zone 2.

Q: How much does radon mitigation cost in Hillman?

Radon mitigation typically costs between $800 and $2,000. Most standard systems fall in the $1,000-$1,500 range.

Check local Hillman radon levels and find certified testing and mitigation professionals to keep your home safe

Hillman, MN Radon Facts

EPA Radon Zone Zone 2 — Moderate Risk 2–4 pCi/L (Zone 2)

County Morrison County, MN

Zip Code 56338

Situated in Morrison County in central Minnesota, Hillman lies within glacial till deposits over Precambrian bedrock that can influence radon levels throughout the region. The community's housing stock in zip code 56338 includes older farmhouses and newer rural homes, many featuring full basements typical of Minnesota construction. Testing data is currently limited, encouraging homeowners to establish individual radon baselines.

8.45

pCi/L area average

Above EPA Action Level

Nearby homeowner readings average 8.45 pCi/L, based on 11 tests from 10 nearby cities. No readings have been submitted for Hillman yet, so the closest recorded data is shown as a benchmark. The EPA recommends taking action at or above 4.0 pCi/L.

4.0 EPA

10+

Hillman, MN Radon Mitigation

Professional radon mitigation is the most effective way to permanently lower radon levels and protect your household.

Need Radon Mitigation or Testing in Hillman?

100% Free, No-Obligation Quotes
Matches You with State-Licensed Morrison County Pros

1-800-299-3578 320-209-7507 (local) Toll-free · Mon–Fri 8am–6pm ET

Radon Readings Near Hillman, MN

No homeowner tests have been submitted for Hillman yet. The closest cities with user-submitted radon data are shown below — explore them to gauge local conditions. Radon varies by home, so testing is the only way to know your level.

City	Distance	Avg User Level	Readings
Isle	20.7 mi	20.00 pCi/L	1
Milaca	22.9 mi	4.00 pCi/L	1
Deerwood	26.0 mi	16.00 pCi/L	1
Mora	30.6 mi	6.00 pCi/L	2
Aitkin	30.6 mi	8.00 pCi/L	1
Nisswa	35.5 mi	4.00 pCi/L	1
Motley	36.0 mi	7.00 pCi/L	1
Holdingford	36.5 mi	5.00 pCi/L	1

Morrison County Radon Profile

Morrison County is mapped as EPA Radon Zone 2, where the local geology is predicted to produce moderate indoor screening levels between 2 and 4 pCi/L. User-submitted readings are still sparse within Morrison County itself, so the nearby measurements shown on this page provide the closest real-world picture of local radon conditions. Radon is the second leading cause of lung cancer in the United States, and a short-term test is the only way to confirm a specific home's level in Morrison County.

Radon FAQ for Hillman, MN

What EPA Radon Zone is Hillman in?

Hillman and the 56338 zip code are in Morrison County, which has an EPA assigned Radon Zone of 2. A zone of 2 predicts an average indoor radon screening level between 2 and 4 pCi/L.

Why are radon readings shown from areas near Hillman?

No homeowner radon tests have been submitted for Hillman yet. Because radon is driven by regional soil and bedrock geology, readings from the closest cities—and the Morrison County average—are the best available indicator of local conditions until Hillman homeowners submit their own results. The EPA still recommends testing every individual home, since levels can vary significantly from house to house.

How much does radon mitigation cost in Hillman?

Radon mitigation in Hillman typically costs between $800 and $2,000. Most homes with standard basements can be mitigated with a sub-slab depressurization system in the $1,000–$1,500 range. Factors that can increase cost include complex foundations, crawl spaces, or very high radon levels.

Should I test for radon if I'm buying a home in Hillman?

Yes. Radon testing should be part of every home purchase. A short-term radon test is typically included as part of the home inspection process and costs $150–$250. If elevated levels are found, you can negotiate mitigation as part of the sale.