Elgin, MN Radon Levels

Q: What EPA Radon Zone is Elgin in?

Elgin is in Wabasha County, EPA Zone 1.

Q: Why are radon readings shown from areas near Elgin?

No homeowner radon tests have been submitted for Elgin yet, so readings from the closest cities and the Wabasha County average are used as the best available indicator of local conditions. The EPA recommends testing every individual home.

Q: How much does radon mitigation cost in Elgin?

Radon mitigation typically costs between $800 and $2,000. Most standard systems fall in the $1,000-$1,500 range.

Check local Elgin radon levels and find certified testing and mitigation professionals to keep your home safe

Elgin, MN Radon Facts

EPA Radon Zone Zone 1 — High Risk > 4.0 pCi/L (Zone 1)

County Wabasha County, MN

Zip Code 55932

Situated in Wabasha County within the Rochester Metro area, Elgin sits over Minnesota's limestone and sandstone formations that contribute to the state's elevated radon potential. Limited testing data for the 55932 zip code means residents cannot rely on community averages to assess their individual risk. Minnesota's Zone 1 classification and cold climate conditions that keep homes sealed tight make radon testing essential for all homeowners.

7.67

pCi/L area average

Above EPA Action Level

Nearby homeowner readings average 7.67 pCi/L, based on 6 tests from 5 nearby cities. No readings have been submitted for Elgin yet, so the closest recorded data is shown as a benchmark. The EPA recommends taking action at or above 4.0 pCi/L.

4.0 EPA

10+

Elgin, MN Radon Mitigation

Professional radon mitigation is the most effective way to permanently lower radon levels and protect your household.

Need Radon Mitigation or Testing in Elgin?

100% Free, No-Obligation Quotes
Matches You with State-Licensed Wabasha County Pros

1-800-299-3578 507-369-2661 (local) Toll-free · Mon–Fri 8am–6pm ET

Radon Readings Near Elgin, MN

No homeowner tests have been submitted for Elgin yet. The closest cities with user-submitted radon data are shown below — explore them to gauge local conditions. Radon varies by home, so testing is the only way to know your level.

City	Distance	Avg User Level	Readings
Minnesota City	25.6 mi	7.00 pCi/L	1
Winona	28.4 mi	10.00 pCi/L	1
Blooming Prairie	43.4 mi	4.00 pCi/L	1
Le Roy	43.6 mi	8.00 pCi/L	1
Hastings	50.0 mi	8.50 pCi/L	2

Wabasha County Radon Profile

Because of its underlying geology, Wabasha County is mapped as EPA Radon Zone 1 — the most elevated classification — where predicted indoor screening averages exceed 4 pCi/L. Direct test data for Wabasha County remains limited, so the closest neighboring readings are used here to represent the radon conditions homeowners are likely to encounter. As the second leading cause of lung cancer in the U.S., radon warrants testing in every Wabasha County home regardless of zone or a neighbor's results.

Radon FAQ for Elgin, MN

What EPA Radon Zone is Elgin in?

Elgin and the 55932 zip code are in Wabasha County, which has an EPA assigned Radon Zone of 1. A zone of 1 predicts an average indoor radon screening level greater than 4 pCi/L.

Why are radon readings shown from areas near Elgin?

No homeowner radon tests have been submitted for Elgin yet. Because radon is driven by regional soil and bedrock geology, readings from the closest cities—and the Wabasha County average—are the best available indicator of local conditions until Elgin homeowners submit their own results. The EPA still recommends testing every individual home, since levels can vary significantly from house to house.

How much does radon mitigation cost in Elgin?

Radon mitigation in Elgin typically costs between $800 and $2,000. Most homes with standard basements can be mitigated with a sub-slab depressurization system in the $1,000–$1,500 range. Factors that can increase cost include complex foundations, crawl spaces, or very high radon levels.

Should I test for radon if I'm buying a home in Elgin?

Yes. Radon testing should be part of every home purchase. A short-term radon test is typically included as part of the home inspection process and costs $150–$250. If elevated levels are found, you can negotiate mitigation as part of the sale.