Beldenville, WI Radon Levels

Q: What EPA Radon Zone is Beldenville in?

Beldenville is in Pierce County, EPA Zone 1.

Q: How much does radon mitigation cost in Beldenville?

Radon mitigation typically costs between $800 and $2,000. Most standard systems fall in the $1,000-$1,500 range.

Check local Beldenville radon levels and find certified testing and mitigation professionals to keep your home safe

Beldenville, WI Radon Facts

EPA Radon Zone Zone 1 — High Risk > 4.0 pCi/L (Zone 1)

County Pierce County, WI

Zip Code 54003

Located in Pierce County within the Minneapolis-St. Paul metro area, Beldenville sits in Wisconsin's western border region where glacial drift over limestone bedrock creates conditions conducive to radon accumulation. While testing data from zip code 54003 remains limited, homeowners should test their properties given the area's geological characteristics and EPA Zone 1 designation. Many homes in this rural community feature full basements typical of Wisconsin construction.

6.33

pCi/L area average

Above EPA Action Level

Pierce County average: 6.33 pCi/L, based on 3 user-submitted tests across 2 cities in the county. No homeowner readings have been submitted for Beldenville itself yet, so this county figure is the closest available benchmark. The EPA recommends taking action at or above 4.0 pCi/L.

4.0 EPA

10+

Beldenville, WI Radon Mitigation

Professional radon mitigation is the most effective way to permanently lower radon levels and protect your household.

Need Radon Mitigation or Testing in Beldenville?

100% Free, No-Obligation Quotes
Matches You with State-Licensed Pierce County Pros

1-800-299-3578 715-203-8706 (local) Toll-free · Mon–Fri 8am–6pm ET

Radon Readings Near Beldenville, WI

No homeowner tests have been submitted for Beldenville yet. The closest cities with user-submitted radon data are shown below — explore them to gauge local conditions. Radon varies by home, so testing is the only way to know your level.

City	Distance	Avg User Level	Readings
Ellsworth	3.9 mi	5.00 pCi/L	1
River Falls	11.1 mi	7.00 pCi/L	2
Houlton	25.6 mi	4.00 pCi/L	1
Somerset	27.8 mi	4.00 pCi/L	1
Amery	39.9 mi	3.00 pCi/L	1
Osceola	40.0 mi	5.00 pCi/L	1
Altoona	49.0 mi	6.00 pCi/L	1
Almena	49.5 mi	2.00 pCi/L	1

Pierce County Radon Profile

Pierce County falls in EPA Radon Zone 1, meaning the local uranium-bearing geology is predicted to drive average indoor radon screening levels above the EPA's 4 pCi/L action threshold. Homeowner-submitted tests from 2 cities in Pierce County average 6.33 pCi/L across 3 tests — above the EPA's 4 pCi/L action level, reinforcing the need for testing across the county. Since radon is the second leading cause of lung cancer nationally, the EPA urges every household in Pierce County to test, as levels can differ between neighboring homes.

Radon FAQ for Beldenville, WI

What EPA Radon Zone is Beldenville in?

Beldenville and the 54003 zip code are in Pierce County, which has an EPA assigned Radon Zone of 1. A zone of 1 predicts an average indoor radon screening level greater than 4 pCi/L.

Why are radon readings shown from areas near Beldenville?

No homeowner radon tests have been submitted for Beldenville yet. Because radon is driven by regional soil and bedrock geology, readings from the closest cities—and the Pierce County average—are the best available indicator of local conditions until Beldenville homeowners submit their own results. The EPA still recommends testing every individual home, since levels can vary significantly from house to house.

How much does radon mitigation cost in Beldenville?

Radon mitigation in Beldenville typically costs between $800 and $2,000. Most homes with standard basements can be mitigated with a sub-slab depressurization system in the $1,000–$1,500 range. Factors that can increase cost include complex foundations, crawl spaces, or very high radon levels.

Should I test for radon if I'm buying a home in Beldenville?

Yes. Radon testing should be part of every home purchase. A short-term radon test is typically included as part of the home inspection process and costs $150–$250. If elevated levels are found, you can negotiate mitigation as part of the sale.